4634 16 Ave NW, Calgary · Minutes from Market Mall
3x XPEL Dealer of the Year
Open 7 days a week for tint removal, tint replacement, and factory-clear glass restoration. Trusted by Calgary drivers for fast, professional service.
Most jobs completed within 1 to 2 hours. Final price varies based on tint condition and age.
Most commonly booked for traffic tickets, legal compliance, out-of-province inspections, and factory clear windows.
Book Now →Ideal for bubbled, faded, purple, or aging rear tint. Steam-based removal methods used to minimize risk based on tint condition.
Book Now →Popular package for vehicles needing front tint removal alongside rear glass reset or replacement.
Book Now →Complete tint removal across all side windows and rear glass. Ideal before a full retint or vehicle reset.
Book Now →*Final pricing depends on tint age, adhesive condition, film quality, and removal complexity. High-quality tint typically removes in 1 to 2 hours. Older
or brittle tint may require additional labor and may carry increased removal risks.
Removing your tint anyway? Upgrade your finish at the same visit. Apply the 10%
discount to any new tint package.
We use commercial-grade steam equipment and vehicle-specific removal techniques designed to reduce adhesive and glass risks. Our process succeeds on the vast majority of removals. Older or brittle tint may have already compromised factory grid lines during its lifespan, so we’ll always assess your specific tint condition before starting.
Complete adhesive removal. No purple haze, no sticky residue, no scratched glass. Your windows look factory-fresh, not DIY-damaged.
Weekend and evening appointments available. We’re built for customers with deadlines like out-of-province inspections, last-minute fixes, and busy schedules.
Replacing your tint? We can install new tint at the same appointment. Save a trip and save money with our 10% replacement discount.
Tint removal isn't just peeling film off glass. Done wrong, it damages defrost grids, scratches
glass, and leaves adhesive haze that affects visibility. Here's how we do it right.
We install tint daily, so we know exactly how patterns extend inside the gasket, which adhesives need which loosening techniques, and how to ensure smooth glass operation afterward. Every surface gets thoroughly cleaned to ensure your windows function perfectly after removal.
Rear defrost lines can become fragile over time depending on tint age, film quality, and previous installation. While budget shops use aggressive scraping methods that slice through defroster grids, we use commercial-grade steamers and enclosed-chamber techniques designed to minimize stress on the grid. Our process yields a very high success rate, but extremely old, brittle, or purple tint may have already compromised the factory grid lines during its lifespan. We use the safest removal methods possible, but cannot guarantee the integrity of pre-compromised factory lines. We’ll always assess your specific situation before starting work.
Low-quality or aging tint often leaves adhesive haze that collects dirt, affects visibility, and interferes with smooth glass operation. Our process focuses on thorough cleanup so your glass is left as clear as possible after removal.
Door panels, dashboard, and surrounding interior trim are protected with plastic before removal begins, reducing moisture and debris exposure during the process.
Commercial-grade equipment for safe, efficient removal
Older low-quality tints can release harmful fumes when removed. Our team uses PPE and proper ventilation throughout the process to protect both our staff and your vehicle’s interior air quality.
Style evolves. Get back to clear glass or upgrade to a different tint level.
Tickets for non-compliant tint? Get your front windows back to legal limits.
Moved to Alberta? Front-window tint often needs removal to pass AMVIC inspection.
Bubbled, purple, scratched, or peeling? Old tint hurts your vehicle’s appearance and resale value.
Upgrade from basic tint to premium ceramic — better heat rejection, UV protection, and clarity.
Everything you need to know about professional tint removal
Side windows aren’t going to get damaged by removing tint at a professional shop. Even though removing tint from rear glass is more challenging than front glass, our shop can do it pretty well. When the rear window tint is low quality, brittle or too old, there is a slight likelihood of damaging the grid lines. However, we optimize the best methods to minimize this risk.
Typically, side windows can be removed within one to two hours. The tint removal of the back glass will vary depending on its condition. It may take up to five hours to safely remove the film if it is brittle or too old.
Although the DIY method is possible, it is very challenging without the proper tools and techniques. Defrost grids can be damaged, and left over adhesive can collect dust, reduce visibility and impede smooth operation of your glass. In order to avoid damage and save time, it is highly recommended to use a professional shop.
The cost of removing tint can range from $75 to $249. Several factors determine the cost of the tint removal, including the number of windows, their condition, and the quality of the tint.
Most window tinting shops also remove window tint. Some shops will not remove window tint unless it has been installed by them. The good news is, if you are in search of a window tint removal company near me, contact Calgary Window Tinting. We remove all brands of tint, including XPEL, 3M, Llumar, Sun-Gard, SunTek and others.
In general, any product from a reputable brand, such as XPEL or 3M, should be effective if the instructions are followed properly. In comparison to general adhesive removers, tint adhesive removers are designed specifically for the purpose. We have not tested other products that may work. Many people wonder whether WD 40, a tint removal kit or Windex will work. The simple answer is that we have not tested these. The goal of our window tint removal Calgary service is to save you time and provide you with a reliable service.
We offer a 10% discount on our tint packages for window tint replacement in Calgary.
Yes, window film removal in Calgary is completely safe when it is removed by a professional shop.
The most effective way to remove window tint is by using heat or steam to soften the adhesive so the film can be peeled away cleanly. Any remaining glue is then removed with specialized adhesive cleaners and detailing tools. Side windows can often be removed using careful scraping techniques with stainless-steel razor, while rear windows require a different approach because defrost lines can be more delicate and may require extra care. Professional tint removal typically uses commercial-grade steam, adhesive removers, and specialized tools to loosen glue, clean edges, and restore clear glass while reducing the risk of damage or excessive residue.
Yes. We specialize in both tint removal and new tint installation, and we regularly complete both in the same visit. Once the old film is removed, the glass is carefully cleaned and any remaining adhesive residue is cleared away so it is ready for a fresh layer of tint. This saves you time, avoids an extra trip, and makes it easy to upgrade to premium XPEL Prime or ceramic window tint in one appointment.
Our team is here to help you understand the tint removal process and answer any specific questions about your vehicle. We provide honest assessments and transparent pricing.
Whether you need out-of-province inspection prep, a ceramic upgrade, or a
damaged-tint reset, we're ready when you are.